Mòdulu:String

Dâ Wikipedia, la nciclupidìa lìbbira.

La ducumintazzioni di stu mòdulu si pò criari nta Mòdulu:String/doc

--[[

Questo modulo serve a fornire l'accesso alle funzioni stringa base.

La maggior parte delle funzioni di questo modulo possono essere invocate con
parametri con nome, senza nome o con un misto di entrambi. Quando vengono usati
parametri con nome il software di Mediawiki rimuoverà ogni spazio iniziale o finale
dal parametro. A seconda dell'uso che si vuole fare della funzione può essere
vantaggioso conservare oppure rimuovere questi spazi.

Opzioni globali
    ignore_errors: se settato a 'true' o 1, ogni condizione di errore ritornerà una stringa vuota
                   piuttosto che un messaggio di errore.

    error_category: nel caso si verifichi un errore è il nome di una categoria da includere
                    insieme al messaggio di errore. La categoria di default
                    [Categoria:Errori del Module String]. (TODO:verificare)

    no_category: Se settato a 'true' o 1, non verranno aggiunte categorie in caso di errore.

Unit tests per questo modulo sono disponibili a Module:String/test.

Diverse funzioni fanno uso di pattern Lua, questi sono una forma di espressione regolare, per
maggiori informazioni vedi:
* http://www.lua.org/manual/5.1/manual.html#5.4.1
* http://www.mediawiki.org/wiki/Extension:Scribunto/Lua_reference_manual#Patterns
* http://www.mediawiki.org/wiki/Extension:Scribunto/Lua_reference_manual#Ustring_patterns

]]

local str = {}

--[[
len

Questa funzione ritorna la lunghezza di una stringa.

Uso:
{{#invoke:String|len|stringa|}}
O
{{#invoke:String|len|s=stringa}}

Parametri
    s: La stringa di cui ritornare la lunghezza

Se invocata usando parametri nominati, Mediawiki rimuoverà automaticamente ogni spazio iniziale
o finale dalla stringa.
]]
function str.len( frame )
    local new_args = str._getParameters( frame.args, {'s'} );
    local s = new_args['s'] or '';
    return mw.ustring.len( s )
end

--[[
sub

Questa funzione ritorna la sottostringa di una stringa bersaglio, come indicato dagli indici

Uso:
{{#invoke:String|sub|stringa_bersaglio|indice_iniziale|indice_finale}}
O
{{#invoke:String|sub|s=stringa_bersaglio|i=indice_iniziale|j=indice_finale}}

Parameters
    s: La stringa da cui estrarre una sottostringa
    i: La posizione iniziale del primo carattere della sottostringa da ritornare, se non
       specificato è 1.
    j: La posizione finale dell'ultimo carattere della sottostringa da ritornare, se non
       specificato corrisponde alla lunghezza della stringa_bersaglio (l'ultimo carattere).

I caratteri della stringa sono numerati a partire da 1. Se i o j hanno un valore negativo allora
contano la posizione contando dalla fine della stringa, -1 è l'ultimo carattere della stringa,
-2 il penultimo, ecc...

Se le posizioni sono al di fuori degli estremi della stringa viene ritornato un messaggio di
errore.
]]
function str.sub( frame )
    local new_args = str._getParameters( frame.args, { 's', 'i', 'j' } );
    local s = new_args['s'] or '';
    local i = tonumber( new_args['i'] ) or 1;
    local j = tonumber( new_args['j'] ) or -1;

    local len = mw.ustring.len( s );

    -- Convert negatives for range checking
    if i < 0 then
        i = len + i + 1;
    end
    if j < 0 then
        j = len + j + 1;
    end

    if i > len or j > len or i < 1 or j < 1 then
        return str._error( 'Indici fuori dagli estremi della stringa' );
    end
    if j < i then
        return str._error( 'Indici in ordine sbagliato' );
    end

    return mw.ustring.sub( s, i, j )
end

--[[
Questa funzione implementa tutte le caratteristiche di  {{str sub}} e viene mantenuta per motivi
di compatibilità con template più vecchi.
]]
function str.sublength( frame )
    local i = tonumber( frame.args.i ) or 0
    local len = tonumber( frame.args.len )
    return mw.ustring.sub( frame.args.s, i + 1, len and ( i + len ) )
end

--[[
match

Questa funzione ritorna dalla stringa bersaglio una sottostringa corrispondente a un pattern
specificato.

Uso:
{{#invoke:String|match|source_string|pattern_string|start_index|match_number|plain_flag|nomatch_output}}
O
{{#invoke:String|match|s=source_string|pattern=pattern_string|start=start_index
    |match=match_number|plain=plain_flag|nomatch=nomatch_output}}

Parametri
    s: La stringa da cercare
    pattern: Il pattern da cercare nella stringa
    start: La posizione iniziale da cui iniziare la ricerca, se non specificato è 1.
    match: Se c'è ci sono corrispondenze multiple quale ritornare, 1 per la prima
    corrispondenza, 2 per la seconda ecc.. Un valore negativo indica di contare
    all'indietro a partire dall'ultima corrispondenza, quindi match = -1 significa
    chiedere l'ultima corrispondenza. Se non specificato è 1
    plain: Se vero specifica che il pattern deve essere considerato come una
           stringa normale, piuttosto che un pattern Lua. Se non specificata è falsa.
    nomatch: Il valore da ritornare se non ci sono corrispondenze, invece di ritornare
             un errore.

Se richiamata usando parametri nominati Mediawiki rimuoverà automaticamente tutti gli
spazi iniziali e finali. In alcune circostanze questo può essere il comportamento
desiderato, in altre si potrebbe volerli conservare.

Se match_number o start_index sono al di fuori degli estremi della stringa s, allora
la funzione ritorna un errore. Viene generato un errore anche se il non vengono trovate
corrispondenze. Per sopprimere gli errori si può aggiungere il parametro ignore_errors=true,
in questo caso in caso di errore verrò ritornata una stringa vuota.

]]
function str.match(frame)
    return str._match(frame.args)
end

--[[
Entry point per chiamata diretta da un modulo
]]
function str._match( args )
    local new_args = str._getParameters( args, {'s', 'pattern', 'start', 'match', 'plain', 'nomatch'} );
    local s = new_args['s'] or '';
    local start = tonumber( new_args['start'] ) or 1;
    local plain_flag = str._getBoolean( new_args['plain'] or false );
    local pattern = new_args['pattern'] or '';
    local match_index = math.floor( tonumber(new_args['match']) or 1 );
    local nomatch = new_args['nomatch'];

    if s == '' then
        return nomatch or str._error( 'La stringa in cui cercare è vuota' );
    end
    if pattern == '' then
        return nomatch or str._error( 'La stringa o pattern da cercare è vuota' );
    end
    if math.abs(start) < 1 or math.abs(start) > mw.ustring.len( s ) then
        return nomatch or str._error( 'La posizione iniziale richiesta è fuori dagli estremi della stringa' );
    end
    if match_index == 0 then
        return nomatch or str._error( 'Match index è nullo' );
    end
    if plain_flag then
        pattern = str._escapePattern( pattern );
    end

    local result
    if match_index == 1 then
        -- Il caso più semplice, trova la prima corrispondenza
        result = mw.ustring.match( s, pattern, start )
    else
        if start > 1 then
            s = mw.ustring.sub( s, start );
        end

        local iterator = mw.ustring.gmatch(s, pattern);
        if match_index > 0 then
            -- Ricerca in avanti
            for w in iterator do
                match_index = match_index - 1;
                if match_index == 0 then
                    result = w;
                    break;
                end
            end
        else
            -- Ricerca all'indietro deve estrarre tutte le corrispondenze
            local result_table = {};
            local count = 1;
            for w in iterator do
                result_table[count] = w;
                count = count + 1;
            end

            result = result_table[ count + match_index ];
        end
    end

    if result == nil then
        if nomatch == nil then
            return str._error( 'Corrispondenza non trovata' );
        else
            return nomatch;
        end
    else
        return result;
    end
end

--[[
pos

Questa funzione ritorna il carattere della stringa in posizione pos.

Uso:
{{#invoke:String|pos|stringa_bersaglio|indice}}
O
{{#invoke:String|pos|target=stringa_bersaglio|pos=indice}}

Parametri
    target: La stringa in cui cercare
    pos: La posizione del carattere da ritornare

Se richiamata usando parametri nominati Mediawiki rimuoverà automaticamente tutti gli
spazi iniziali e finali. In alcune circostanze questo può essere il comportamento
desiderato, in altre si potrebbe volerli conservare.

I caratteri della stringa sono numerati a partire da 1. Se pos è un valore negativo allora
conta la posizione partendo dalla fine della stringa, -1 è l'ultimo carattere della stringa,
-2 il penultimo, ecc...

Se la posizione richiesta è 0 o al di fuori degli estremi della stringa viene ritornato
un errore.
]]
function str.pos( frame )
    local new_args = str._getParameters( frame.args, {'target', 'pos'} );
    local target_str = new_args['target'] or '';
    local pos = tonumber( new_args['pos'] ) or 0;

    if pos == 0 or math.abs(pos) > mw.ustring.len( target_str ) then
        return str._error( 'Indice della stringa fuori dagli estremi' );
    end

    return mw.ustring.sub( target_str, pos, pos );
end

--[[
str_find

Questa funzione duplica il comportamento di  {{str_find}}, incluso i suoi comportamenti
irregolari. Questa funzione è fornita per motivi di compatibilità con i vecchi template,
ma SI RACCOMANDA di non utilizzarla in nuovi template. Nello sviluppo di nuovo codice
si raccomanda di usare la funzione  "find".

Parametri
    source: La stringa in cui cercare
    target: la stringa da cercare

Ritorna la posizione nella stringa source del primo carattere in cui c'è è stata
trovata la stringa target. I caratteri della stringa sono numerati a partire da 1. La funzione
ritorna -1 se la stringa "target" non è contenuta in "source".

Nota importante: Per compatibilità con il vecchio template se la stringa "target" è vuota o manca
la funzione ritorna un valore di "1"
]]
function str.str_find( frame )
    local new_args = str._getParameters( frame.args, {'source', 'target'} );
    local source_str = new_args['source'] or '';
    local target_str = new_args['target'] or '';

    if target_str == '' then
        return 1;
    end

    local start = mw.ustring.find( source_str, target_str, 1, true )
    if start == nil then
        start = -1
    end

    return start
end

--[[
find

Questa funzione permette di cercare una stringa bersaglio o un pattern Lua all'interno di
un'altra stringa.

Uso:
{{#invoke:String|find|stringa_sorgente|stringa_bersaglio|indice_iniziale|plain_flag}}
O
{{#invoke:String|find|source=stringa_sorgente|target=stringa_bersaglio|start=indice_iniziale|plain=plain_flag}}

Parametri
    source: La stringa in cui cercare
    target: La stringa o pattern Lua da cercare
    start: La posizione da cui iniziare la ricerca, se non specificato è 1
    plain: Se è vero indica che la stringa target deve essere considerata come una
           testo normale e non come un pattern Lua, se non specificata è vera

Se richiamata usando parametri nominati Mediawiki rimuoverà automaticamente tutti gli
spazi iniziali e finali. In alcune circostanze questo può essere il comportamento
desiderato, in altre si potrebbe volerli conservare.

Questa funzione ritorna la prima posizione maggiore o uguale a  "start" a partire dalla quale
"target" si trova in  "source".  I caratteri della stringa sono numerati a partire da 1.
Se "target" non viene trovato ritorna 0. Se "source" o "target" sono mancanti o vuoti ritorna 0.

Questa funzione dovrebbe essere sicura per stringhe  UTF-8.
]]
function str.find( frame )
    local new_args = str._getParameters( frame.args, {'source', 'target', 'start', 'plain' } );
    local source_str = new_args['source'] or '';
    local pattern = new_args['target'] or '';
    local start_pos = tonumber(new_args['start']) or 1;
    local plain = new_args['plain'] or true;

    if source_str == '' or pattern == '' then
        return 0;
    end

    plain = str._getBoolean( plain );

    local start = mw.ustring.find( source_str, pattern, start_pos, plain )
    if start == nil then
        start = 0
    end

    return start
end

--[[
replace

Questa funzione permette di rimpiazzare una stringa o pattern bersaglio con un'altra
stringa.

Uso:
{{#invoke:String|replace|stringa_sorgente|stringa_pattern|nuova_stringa|numero_di_sostituzioni|plain_flag}}
O
{{#invoke:String|replace|source=stringa_sorgente|pattern=stringa_pattern|replace=nuova_stringa|
   count=numero_di_sostituzioni|plain=plain_flag}}

Parametri:
    source: La stringa da cercare
    pattern: La stringa o pattern Lua da trovare in  source
    replace: Il testo di sostituzione
    count: Il numero di volte in cui rimpiazzare la stringa, se non specificato tutte.
    plain: Se vero indica che il pattern deve essere considerato come testo normale e non
           come pattern Lua, il valore di default è vero
]]
function str.replace( frame )
    local new_args = str._getParameters( frame.args, {'source', 'pattern', 'replace', 'count', 'plain' } );
    local source_str = new_args['source'] or '';
    local pattern = new_args['pattern'] or '';
    local replace = new_args['replace'] or '';
    local count = tonumber( new_args['count'] );
    local plain = new_args['plain'] or true;

    if source_str == '' or pattern == '' then
        return source_str;
    end
    plain = str._getBoolean( plain );

    if plain then
        pattern = str._escapePattern( pattern );
        replace = mw.ustring.gsub( replace, "%%", "%%%%" ); --Only need to escape replacement sequences.
    end

    local result;

    if count ~= nil then
        result = mw.ustring.gsub( source_str, pattern, replace, count );
    else
        result = mw.ustring.gsub( source_str, pattern, replace );
    end

    return result;
end

--[[
    Funzione per utilizzare string.rep in un template.
]]

function str.rep( frame )
    local repetitions = tonumber( frame.args[2] )
    if not repetitions then
        if frame.args[2] == '' then -- se il secondo parametro è una stringa nulla ritorno una stringa nulla
            return ''
        else
            return str._error( 'la funzione rep si aspetta un secondo parametro con il numero di ripetizioni, ricevuto "' .. ( frame.args[2] or '' ) .. '"' )
        end
    end
    return mw.ustring.rep( frame.args[1] or '', repetitions )
end

--[[
    Funzione per decodificare una stringa codificata percentualmente.
    Richiama la funzione mw.uri.decode di scribunto, vedi
    https://www.mediawiki.org/wiki/Extension:Scribunto/Lua_reference_manual#mw.uri.decode
]]

function str.decode( frame )
    local valid_enctype = { QUERY = true, WIKI = true, PATH = true}

    local new_args = str._getParameters(frame.args, {'source', 'enctype'})
    local source = new_args['source'] or ''
    local enc_type = new_args['enctype'] or 'QUERY'
    if not valid_enctype[enc_type] then
        enc_type = 'QUERY'
    end
    return mw.uri.decode(source, enc_type)
end

--[[
    Funzione per semplificare stringhe con diacritici
]]

function str.collate( frame )

    local collation = { 
        {'[áàăắằẵẳâấầẫẩǎåǻäǟãȧǡąāảȁȃạặậḁⱥᶏᴂæɐᶐɒə]', 'a'},
        {'[ÁÀĂẮẰẴẲÂẤẦẪẨǍÅÅǺÄǞÃȦǠĄĀẢȀȂẠẶẬḀȺᴁÆƏ]', 'A'},
        {'[ḃḅḇƀɓ]', 'b'},
        {'[ḂḄḆɃ]', 'B'},
        {'[ćĉčċçḉȼƈ]', 'c'},
        {'[ĆĈČĊÇḈȻƇ]', 'C'},
        {'[đḍḓḏðďḋḑ]', 'd'},
        {'[ĐḌḒḎÐĎḊḐ]', 'D'},
        {'[éèĕěêếềễểëẽėȩḝęēḗḕẻȅȇẹệḙḛǝ]', 'e'},
        {'[ÉÈĔĚÊẾỀỄỂËẼĖȨḜĘĒḖḔẺȄȆẸỆḘḚƎ]', 'E'},
        {'[ḟⅎ]', 'f'},
        {'[ḞℲ]', 'F'},
        {'[ǵğĝǧġģḡᵹɠ]', 'g'},
        {'[ǴĞĜǦĠĢḠƓ]', 'G'},
        {'[ĥȟḧḣḩħḥḫẖ]', 'h'},
        {'[ĤȞḦḢḨĦḤḪ]', 'H'},
        {'[íìĭîǐïḯĩįīỉȉȋịḭı]', 'i'},
        {'[ÍÌĬÎǏÏḮĨĮĪỈȈȊỊḬİ]', 'I'},
        {'[ĵǰ]', 'j'},
        {'[Ĵ]', 'J'},
        {'[ḱǩķ]', 'k'},
        {'[ḰǨĶ]', 'K'},
        {'[ĺľļłḷḹḽḻl·l·ŀƚⱡ]', 'l'},
        {'[ĹĽĻŁḶḸḼḺL·L·ĿȽⱠ]', 'L'},
        {'[ḿṁṃ]', 'm'},
        {'[ḾṀṂ]', 'M'},
        {'[ńǹňñṅņṇṋṉ]', 'n'},
        {'[ŃǸŇÑṄŅṆṊṈ]', 'N'},
        {'[óòŏốồỗổǒôöȫőõṍṏȭȯȱøǿǫǭōṓṑỏȍȏơớờỡởợọộœ]', 'o'},
        {'[ÓÒŎỐỒỖỔǑÔÖȪŐÕṌṎȬȮȰØǾǪǬŌṒṐỎȌȎƠỚỜỠỞỢỌỘŒ]', 'O'},
        {'[ṕṗ]', 'p'},
        {'[ṔṖ]', 'P'},
        {'[ŕřṙŗȑȓṛṝṟ]', 'r'},
        {'[ŔŘṘŖȐȒṚṜṞ]', 'R'},
        {'[śṥŝṧṡşṣṩșšß]', 's'},
        {'[ŚṤŜṦṠŞṢṨȘŠ]', 'S'},
        {'[ťṫẗţṭțṱṯ]', 't'},
        {'[ŤṪŢṬȚṰṮ]', 'T'},
        {'[úùŭûǔůüǘǜǚǖűũṹųūṻủȕȗưứừữửựụṳṷṵʉ]', 'u'},
        {'[ÚÙŬÛǓŮÜǗǛǙǕŰŨṸŲŪṺỦȔȖƯỨỪỮỬỰỤṲṶṴɄ]', 'U'},
        {'[ṽṿʋ]', 'v'},
        {'[ṼṾƲ]', 'V'},
        {'[ẃẁŵẘẅẇẉⱳ]', 'w'},
        {'[ẂẀŴ̊ẄẆẈⱲ]', 'W'},
        {'[ýỳŷẙÿỹẏȳỷỵɏƴ]', 'y'},
        {'[ÝỲŶ̊ŸỸẎȲỶỴɎƳ]', 'Y'},
        {'[źẑžżẓẕƶȥʐⱬ]', 'z'},
        {'[ŹẐŽŻẒẔƵȤʐⱫ]', 'Z'},
    }

    local new_args = str._getParameters(frame.args, {'source'})
    local source = new_args['source'] or ''
    --local source = mw.ustring.toNFC(source)

    for _, el in ipairs(collation) do
        source = mw.ustring.gsub( source, el[1], el[2])
    end
    return source
end

--[[
    Funzione per estrarre da un titolo la stringa adatta all'ordinamento alfabetico. 
]]

function str.titolo_alfa(frame)
    -- Evito "I", "A", "Die"... che darebbero molte false corrispondenze in lingue diverse
    local articoli = {"Il ", "Lo ", "La ", "L'", "Gli ", "Le ", "Un ", "Uno ", "Una ", "Un'", "The ", "An ", "Les ", "El ", "Los ", "Las ", "Der ", "Das "}

    local source = frame.args[1]
    if not source or source == '' then
        source = mw.title.getCurrentTitle().text 
    end
    if not source or source == '' then
        return ''
    end
    source = mw.ustring.gsub(source, ' %(.*%)$', '')
    source = str.collate( { args = { source } } )
    source = mw.ustring.gsub(source, "^['%(%.¡¿ ]*", '')
    for _,article in ipairs(articoli) do
        source = mw.ustring.gsub(source, "^(" .. article .. ")(.*)$", "%2, %1")
    end
    source = mw.ustring.gsub(source, '^%l', mw.ustring.upper)
    source = mw.text.trim(source)
    return source
end


-- =================================================================
-- Classe per gestire i parametri
-- =================================================================
local Param = {}
Param.__index = Param

function Param.new(par_name, alt_name)
    if  par_name ~= "$index" and not mw.ustring.find(par_name, '#') then par_name = par_name .. '#' end;
    return setmetatable({
        name = par_name,
        base_name = mw.ustring.gsub(par_name, ' ?#', '', 1),
        alt = alt_name
     }, Param)
end

function Param:get_other_value(args, index)
    if self.name == '$index' then
        return tostring(index), true
    else
        return args[mw.ustring.gsub(self.name, '#', tostring(index), 1)] or '', false
    end
end

function Param:get_first_value(args, index, base_index)
    function value_or_nil (s)
        if s and s ~= '' then return s end
        return nil
    end

    if self.name == '$index' then
        return tostring(index), true
    end
    if index == base_index then
        return value_or_nil(args[mw.ustring.gsub(self.name, '#', tostring(index), 1)]) or
               value_or_nil(args[self.base_name]) or value_or_nil(args[self.alt]) or '', false
    else
        return value_or_nil(args[mw.ustring.gsub(self.name, '#', tostring(index), 1)]) or
               value_or_nil(args[self.alt]) or '', false
    end
end


setmetatable(Param, { __call = function(_, ...) return Param.new(...) end })
-- =================================================================
-- fine dichiarazione classe per parametro
-- =================================================================

-- =================================================================
-- Classe per gestire il messaggio
    -- =================================================================
local Message = {}
Message.__index = Message

function Message.new(msg)
    -- converto parentesi graffe che sono state precedute da "\"
    msg = mw.ustring.gsub(msg, '\\{', '{')
    msg = mw.ustring.gsub(msg, '\\}', '}')
    local frame = mw.getCurrentFrame():getParent() or mw.getCurrentFrame()

    return setmetatable({
        msg =  msg,
        values = {},
        frame = frame,
     }, Message)
end

function Message:reset_values()
    self.values = {}
end

function Message:add_value(value)
    self.values[#self.values+1] = value
end

function Message:text()
    return self.frame:preprocess(mw.message.newRawMessage(self.msg, self.values):plain())
end

setmetatable(Message, { __call = function(_, ...) return Message.new(...) end })
-- =================================================================
-- fine dichiarazione classe per messaggio
-- =================================================================



--[[
    Funzione per unire una o più liste di valori in una stringa.

Uso:
{{#invoke:String|arraytostring|par1=xxx|par2=xxx....|parn=xxxx|msg=msg|separator=|congiunzione=|pre=|post=|lista=}}

Parametri:
    par1...parn: i nomi base dei parametri da inserire nel messsaggio, devono contenere il carattere '#' che precisa la
             posizione in cui inserire l'indice. Se viene valorizzato a '$index' avrà automaticamente il valore del
             contatore.
    msg: il messaggio (cioè la riga unitaria) in cui eventuali caratteri '{', '}' dovranno essere
         preceduti da '\', mentre una "|" dovrà essere inserita con il template {{!}}.
         I valori da sostituire sono da inserire come $n ($1 sarà sostituito dal
         valore di par1, $2 dal valore di par2, ecc...)
    separatore: La stringa da inserire tra ogni valore
    congiunzione: La stringa da inserire invece di separatore tra l'ultimo e il penultimo valore. Se
                  non precisato viene usato il valore di separatore
    pre: eventuale stringa che precede l'unione delle stringhe
    post: eventuale stringa che segue l'unione delle stringhe
    indentazione: una stringa da ripetere cumulativamente per ogni messaggio (tipicamente '&nbsp')
    lista: se valorizzata a:
                'puntata' imposta i parametri per una lista puntata
                'ordinata' imposta i parametri per una lista ordinata
                'infobox' imposta l'unione come una lista, eccetto che nel caso ci sia
                          solo un elemento
                Se lista è valorizzata  separatore/congiunzione/pre/post sono ignorati, salvo il caso di 'infobox' e la
                lista contenga solo un elemento.
    nmin = indice iniziale da cui partire a scandire i parametri (di default pari a 1)
    nmax = indice massimo a cui arrivare con i parametri (se non precisato illimitato)
    nobbligatori = l'indice minimo che deve essere valutato anche in presenza di buchi nella sequenza (comunque l'indice massimo
                   che viene valutato è nmax)
    baseIndex = valore dell'indice che può essere sostituito da stringa nulla  (default = 1)

Esempi di chiamata:
     {{#invoke:string:arraytostring|par1=var#|separatore=,|congiunzione=#32;e#32;}}
     {{#invoke:string:arraytostring|par1=disegnatore #|par2=disegnatore # nota|msg = $1 <small>$2</small>|lista=infobox }}
     {{#invoke:string:arraytostring|par1=editore #|par2=etichetta #|par3=editore # nota| msg=$1 \{\{#if:$2{{!}}$2 <small>$3</small>\}\}|lista=infobox }}

]]
function str.arraytostring(frame)

    local base_args = frame.args
    local params = {}
    if not base_args then return str._error('Lista parametri vuota') end
    -- carico la lista dei parametri
    local index = 1
    while true do
        local par_name = base_args['par' .. index] or (index == 1 and base_args['par']) or ''
        if par_name == '' then break end
        --carico eventuale nome alternativo per il primo parametro
        local alt_name = base_args['altpar' .. index] or (index == 1 and base_args['altpar']) or nil
        params[index] = Param(par_name, alt_name)
        index = index + 1
    end
    --carico il messaggio
    local msg = base_args.msg or '$1'
    --if msg == '' then return str._error('Manca il messaggio da riprodurre.') end
    local message = Message(msg)
    elements = {}
    -- carico gli altri parametri di formattazione
    local Nmax = tonumber(base_args.Nmax) or tonumber(base_args.nmax) or 0
    local base_index = tonumber(base_args.baseindex) or tonumber(base_args.baseIndex) or 1
    local index = tonumber(base_args.Nmin) or tonumber(base_args.nmin) or base_index
    local Nobbligatori = tonumber(base_args.Nobbligatori) or tonumber(base_args.nobbligatori) or base_index-1
    local indentazione = base_args.indentazione or nil
    local args = frame:getParent().args
    -- estraggo il primo valore
    local found = false

    for i, param in ipairs(params) do
        local v, is_index = param:get_first_value(args, index, base_index)
        if (not(is_index) or base_index<=Nobbligatori) and v ~= '' then found = true end
        message:add_value(mw.text.trim(v))
    end
    if found then
        elements[#elements+1] = message:text()
        index = index + 1
    end
    -- elaboro i valori successivi
    while true do
        if Nmax > 0 and index > Nmax then break end
        message:reset_values()
        found = false
        for i, param in ipairs(params) do
            local v, is_index = param:get_other_value(args, index)
            if (not(is_index) or index<=Nobbligatori) and v ~= '' then found = true end
            message:add_value(mw.text.trim(v))
        end
        if found then
            elements[#elements+1] = message:text()
        elseif index >= Nobbligatori then
            break
        end
        index = index + 1
    end
    if #elements == 0 then return '' end
    -- carico separatori, congiunzione, pre e postazione
    local pre, post, separatore, congiunzione, indent = '', '', '', '', ''
    local lista = base_args.lista or ''
    if lista == 'puntata' or (lista =='infobox' and #elements >1) then
        pre = '<UL><LI>'
        post = '</LI>\n</UL>'
        separatore = '</LI>\n<LI>'
        congiunzione = separatore
    elseif lista == 'ordinata' then
        pre = '<OL><LI>'
        post = '</LI>\n</OL>'
        separatore = '</LI>\n<LI>'
        congiunzione = separatore
    else
        pre = base_args.pre or ''
        post = base_args.post or ''
        separatore = base_args.separatore or ''
        congiunzione = base_args.congiunzione or separatore
    end
    if indentazione then
        local current_indentazione = indentazione
        for i, msg in ipairs(elements) do
            elements[i] = current_indentazione .. elements[i]
            current_indentazione = current_indentazione .. indentazione 
        end
    end
    return pre .. mw.text.listToText(elements, separatore, congiunzione) .. post
end

--[[
    Funzione per unire una lista di valori in una stringa.

Uso:
{{#invoke:String|listtostring|par_number=xxx|msg=msg|separator=|congiunzione=|pre=|post=|lista=}}

Parametri:
    par_number: il numero di parametri che compongono il messaggio
    msg: il messaggio (cioè la riga unitaria) in cui eventuali caratteri '{', '}' dovranno essere
         preceduti da '\', mentre una "|" dovrà essere inserita con il template {{!}}.
         I valori da sostituire sono da inserire come $n (nel primo messaggio $1 sarà sostituito dal parametro posizionale di
         posizione Nmin, $2 da Nmin+2, ecc...., nel secondo messaggio $1 sarà sostituito dal parametro posizionale Nmin+par_number,
         $2 da Nmin+par_number+2, ec....)
         valore di par1, $2 dal valore di par2, ecc...)
    separatore: La stringa da inserire tra ogni valore
    congiunzione: La stringa da inserire invece di separatore tra l'ultimo e il penultimo valore. Se
                  non precisato viene usato il valore di separatore
    pre: eventuale stringa che precede l'unione delle stringhe
    post: eventuale stringa che segue l'unione delle stringhe
    lista: se valorizzata a:
                'puntata' imposta i parametri per una lista puntata
                'ordinata' imposta i aprametri per una lista ordinata
                'infobox' imposta l'unione come una lista, eccetto che nel caso ci sia
                          solo un elemento
                Se lista è valorizzata  separatore/congiunzione/pre/post sono ignorati, salvo il caso di 'infobox' e la
                lista contenga solo un elemento.
    nmax = indice massimo a cui arrivare con i parametri (se non precisato illimitato)
    nobbligatori = l'indice minimo che deve essere valutato anche in presenza di buchi nella sequenza (comunque l'indice massimo
                   che viene valutato è nmax)
    baseIndex = valore del primo parametro posizionale da cui cominciare a leggere (default = 1)

]]


function str.listtostring(frame)

    local base_args = frame.args
    local params = {}
    if not base_args then return str._error('Lista parametri vuota') end
    -- carico la lista dei parametri
    local base_index = tonumber(base_args.base_index) or 1
    local par_number = tonumber(base_args.par_number) or 1
    local Nmax = tonumber(base_args.nmax) or 0
    local Nobbligatori = tonumber(base_args.nobbligatori) or base_index-1
    --carico il messaggio
    local message = Message(base_args.msg or '$1')
    elements = {}
    -- carico gli altri parametri di formattazione
    local index = base_index
    local args = frame:getParent().args
      -- elaboro i valori successivi
    local found = true
    while true do
        if Nmax > 0 and index > Nmax then break end
        message:reset_values()
        found = false
        for i = index, index+par_number-1 do
            message:add_value(args[i] or '')
            if args[i] then
                found = true
            end
        end
        if found then 
            elements[#elements+1] = message:text()
        elseif index > Nobbligatori then
            break
        end
        index = index + par_number
    end
    if #elements == 0 then return '' end
    -- carico separatori, congiunzione, pre e postazione
    local pre, post, separatore, congiunzione = '', '', '', ''
    local lista = base_args.lista or ''
    if lista == 'puntata' or (lista =='infobox' and #elements >1) then
        pre = '<UL><LI>'
        post = '</LI>\n</UL>'
        separatore = '</LI>\n<LI>'
        congiunzione = separatore
    elseif lista == 'ordinata' then
        pre = '<OL><LI>'
        post = '</LI>\n</OL>'
        separatore = '</LI>\n<LI>'
        congiunzione = separatore
    else
        pre = base_args.pre or ''
        post = base_args.post or ''
        separatore = base_args.separatore or ''
        congiunzione = base_args.congiunzione or separatore
    end
    return pre .. mw.text.listToText(elements, separatore, congiunzione) .. post
end

--[[
Funzione di aiuto che popola la lista di argomenti, dato che l'utente può voler utilizzare sia
parametri nominati che non nominati. Questo è rilevante perchè gli spazi iniziali iniziali
e finali dei parametri nominati sono eliminati, mentre quelli dei parametri non nominati
non lo sono. Secondo l'applicazione  si potrebbe a volte conservare o rimuovere gli spazi.
]]
function str._getParameters( frame_args, arg_list )
    local new_args = {};
    local index = 1;
    local value;

    for i,arg in ipairs( arg_list ) do
        value = frame_args[arg]
        if value == nil then
            value = frame_args[index];
            index = index + 1;
        end
        new_args[arg] = value;
    end

    return new_args;
end

--[[
Funzione di appoggio per gestire i messaggi di errore.
]]
function str._error( error_str )
    local frame = mw.getCurrentFrame();
    local error_category = frame.args.error_category or 'Errori riportati dal modulo String';
    local ignore_errors = frame.args.ignore_errors or false;
    local no_category = frame.args.no_category or false;

    if str._getBoolean(ignore_errors) then
        return '';
    end

    local error_str = '<strong class="error">Errore nel modulo String: ' .. error_str .. '</strong>';
    if error_category ~= '' and not str._getBoolean( no_category ) then
        error_str = '[[Categoria:' .. error_category .. ']]' .. error_str;
    end

    return error_str;
end

--[[
Funzione di appoggio per interpretare le stringhe come valori booleane
]]
function str._getBoolean( boolean_str )
    local boolean_value;

    if type( boolean_str ) == 'string' then
        boolean_str = boolean_str:lower();
        if boolean_str == 'false' or boolean_str == 'no' or boolean_str == '0'
                or booleean_str == 'falso' or boolean_str == '' then
            boolean_value = false;
        else
            boolean_value = true;
        end
    elseif type( boolean_str ) == 'boolean' then
        boolean_value = boolean_str;
    else
        error('Nessun valore booleano trovato' );
    end
    return boolean_value
end

--[[
Funzione di appoggio per aggiungere un carattere di escape a tutti i caratteri speciali,
così da trattare una stringa come testo normale e non come pattern di Lua.
]]
function str._escapePattern( pattern_str )
    return mw.ustring.gsub( pattern_str, "([%(%)%.%%%+%-%*%?%[%^%$%]])", "%%%1" );
end

return str

-- Version history:
-- 29/3/2013 traduzione iniziale da en:module:String versione 540627185 del 26 febbraio 2013
-- 07/05/2013 aggiunta funzione rep da en:module:String versione 552254999 del 26 aprile 2013
-- 19/08/2013 aggiunta funzione arraytostring